Heated Pet Bed

How to use your heated pet bed

Operation

  1. Setup: Unzip the bed and place the heating pad between the first two ¼” foam layer.
  2. Heat Regulation: Adjust heat by positioning the pad within the top three ¼” layers. For maximum heat, place it under the first layer; for minimum heat, place it under the third layer.
  3. Placement: Center the heating pad in the bed and ensure the ¾” layer is on the bottom.
  4. Cord Management: Route the cord to the zipper end and close the zipper.

Specifications

  • Power: 12 watts, 24 volts
  • Safety: Equipped with a 24-volt transformer. Do not use an extension cord.

Caution

  1. Liquid: Do not immerse the heating pad in any liquid.
  2. Usage: Only use as a warmer for pet beds.
  3. Indoor Use: Not for outdoor use.
  4. Maintenance: Remove the heating pad before washing the bed.
  5. Damage: Discard if the pad shows signs of deterioration or if chewed by pets.

Attention

  • The heater must be insulated within the bed to feel warm.
  • It takes 1-2 hours to reach maximum temperature.