Item# 970
Specifications
Model 970
- Power: 150 watts, 120 VAC, 60Hz
Precautions
- Grounding: Ensure the outlet is properly grounded. Consult an electrician if unsure.
- Placement: Keep the bird bath away from potential snow drifts.
- Positioning: Do not place the heated bath section directly on the ground.
- Water Safety: Do not immerse the heated bath section in water.
- GFCI Protection: Use a Ground Fault Circuit Interrupter (GFCI) for safety.
General Information
- Design: The bird bath is designed to attract birds with its shape, slope, texture, and depth. Due to its large surface area, water may evaporate quickly, requiring daily refills.
Warranty
- Duration: 12 months from the date of purchase.
- Claims: Contact customer service, many retail stores will not allow returns past 30 days.
Assembly Instructions for Bird Bath Stand
Tools Needed: Phillips screwdriver
- Legs: Align the notch on each leg with the tab inside the bracket, then slide and secure.
- Screws: Tighten the lower screw on the bracket.
- Arms: Repeat the process for the arms and tighten the upper screw.
- Ring: Position the ring above the arms and insert the posts.
- Staking: Use U-shaped wires to stake the stand to the ground, then place the birdbath within the ring.