Stall Supplies
      Back to home
      1. Help Center
      2. Stall Supplies

      Assembly Instructions for DuraPitch and DuraFork

      ASSEMBLY INSTRUCTIONS FOR: DP1 DURAPITCH I – 42” Wood Handle, Basket DP2 DURAPITCH II – 52” Wood Handle, Basket PDF1 DURAFORK – 52” Wood Handle PDF3 DURAFORK – 52” Aluminum Handle PDFE DURAFORK – 52” Ergonomic Alum. Handle

       

      Note on Wood Handles: Due to the natural tendency of wood to expand or contract with varying humidity conditions, we have purposely left a 1/4” step on
      the wood handles. This step increases the diameter of the handle to
      ensure a tight fit to the fork socket.

      Steps for Assembly

      1. Insert Handle:

        • Wood Handles: Insert into the fork head socket, aligning the holes.
        • Aluminum Handles: The fork head will be loose until all hardware is tightened.

      2. Center and Secure:

        • Wood Handles: Center the handle in the socket, ensuring about 1/4” of the hole is visible.
        • Tap the bottom end of the handle on a hard surface to secure it.

      3. Adjust if Necessary:

        • If holes aren’t centered, tap the handle lightly to adjust and repeat the insertion steps.

      4. Tighten Hardware:

        • Insert the nut into the fork head with the nylon side facing out.
        • Insert and fully tighten the screw using a Phillips screwdriver.